Firmware Android: Install and Update Galaxy Young 2 Duos SM-G130HN to G130HNXXU0AOI3 Android 4.4.2 Kitkat [Full Guide]

Thursday, November 12, 2015

Install and Update Galaxy Young 2 Duos SM-G130HN to G130HNXXU0AOI3 Android 4.4.2 Kitkat [Full Guide]

G130HNXXU0AOI3 Android 4.4.2 Kitkat Official Firmware for Samsung Galaxy Young 2 Duos SM-G130HN is now available and you can manually download it from here on ok android and also install it using our Complete Installation Guides that will help you installing Official Firmware Update, So if you want to get this update for Galaxy Young 2 Duos SM-G130HN, you must know that there are several ways to do that, so you can follow this installation guide that will help you installing your Official Firmware Update .

You can install and update G130HNXXU0AOI3 Android 4.4.2 Kitkat Official Firmware Update on your Samsung Galaxy Young 2 Duos SM-G130HN by following one of the following methods.

Note : ok android team are not responsible for any damage caused in your device , so be careful and do that in the right way and in your own risk. Also don't use this Firmware with any other model.

Before doing anything please do a backup for your important data and make sure that your device battery is fully charged or 75% at least.

See this simple guide to learn How to Backup and Restore your Android Phone or Tablet

Now we will show you How to download and install software/firmware update for Galaxy Young 2 Duos SM-G130HN .

How to Install/Update G130HNXXU0AOI3 Android 4.4.2 Kitkat on Galaxy Young 2 Duos SM-G130HN with the official methods (Recommended) :

(1) Using Samsung Kies to check for Firmware Update for Galaxy Young 2 Duos and installing it :

- Run Kies on your computer and make sure that your Computer is connected to the Internet.

- Connect your Samsung GALAXY Young 2 Duos to the USB port in your Computer via USB data transfer cable.

-Wait for your device to appear on the upper left side of the window.

- Click on the device name (SM-G130HN).

- A new window will appear on the right side of Kies.

- Under the “Firmware Information” tab, see if there are any updates available. If there are, you should see the message ‘New Firmware is available‘.

- If you want to install this update on Galaxy Young 2 Duos SM-G130HN, press the ‘Firmware Upgrade‘ button.

- A new window will appear. The process contains more phases : (‘Download’ > ‘Upgrade’ > ‘Complete’).

- At the end of the installation process your device will reboot. Now you can disconnect the cable from the Computer and your phone .

- Click OK .

- You can verify if you have the Latest Firmware update for Galaxy Young 2 Duos SM-G130HN by going to Settings > More > About phone and you will see another Firmware version name and number .

(2) OTA (Over The Air) :

-You can get this update for Galaxy Young 2 Duos SM-G130HN by following this steps and before that make sure your device is connected to the Internet through a Wi-Fi network - go to Settings > More > About Phone > Software Updates and click on ‘Check for updates‘.

How to Install/Update G130HNXXU0AOI3 Android 4.4.2 Kitkat on Galaxy Young 2 Duos SM-G130HN with the manual method :

With this method we will install the Latest Official Firmware Update with Odin, so if you want to Install/Update G130HNXXU0AOI3 Android 4.4.2 Kitkat on Galaxy Young 2 Duos SM-G130HN with Odin follow the following steps :

(1) Download : G130HNXXU0AOI3_G130HNDHR0AOI2_DHR

Details of G130HNXXU0AOI3 Android 4.4.2 Kitkat Official Firmware Update For Galaxy Young 2 Duos SM-G130HN :

XXU0AOI3 Firmware Details :

Model : SM-G130HN

Model Name : GALAXY Young 2 Duos

Country : Unknown

Version : Android 4.4.2

Changelist : 5761229

PDA : G130HNXXU0AOI3

CSC : G130HNDHR0AOI2

To download and G130HNXXU0AOI3 Android 4.4.2 Kitkat on Galaxy Young 2 Duos SM-G130HN for another countries go to this page and select your country.

(2) Extract the G130HNXXU0AOI3_G130HNDHR0AOI2_DHR.ZIP file to any place in your Computer.

(3) Download Odin 3.10.7 from : Download Desktop Odin for Windows [All Versions].

(4) Extract the Odin ZIP file to any place in your computer.

(5) Download and install you Samsung USB drivers . If you already installed Samsung Kies then you already have the USB drivers , If not go to this page and download the latest USB driver for your Samsung device.

(6) Go to Developer Options in you Samsung Galaxy Young 2 Duos SM-G130HN Settings and Activate USB Debugging Mode.

Note: Developer Options is hidden by default, so if you can't see the Developer Options in your device settings ,go to Settings > More > About Phone > Press 7 times on Build Number to make Developer Options Visible to you . Now you can enable USB Debugging Mode in Developer Options .

(7) Turn off your phone and now you have to enter Download Mode .

-To enter Download Mode press and hold : " Power + Volume Down + Home Button " , all at the same time and when you see the warning message release the buttons and press Volume Up button to confirm that you want to enter Download Mode.

(8) Start Odin from your Computer ( You Need To Run Odin As Administrator ) .

(9) Connect your Galaxy Young 2 Duos SM-G130HN via USB data transfer cable.

(10) You will see in Odin a section called ID:COM (on the left upper side of the window). The blank space under it will turn blue if your device is recognized (If the phone is not recognized make sure you have installed the USB Drivers) .

(11) Check "AP / PDA" box and click on "AP / PDA" and add the G130HNXXU0AOI3_G130HNDHR0AOI2_DHR.tar.md5 file from the G130HNXXU0AOI3_G130HNDHR0AOI2_DHR.ZIP extracted folder.

(12) Important !!! Do not place anything under the PIT section and make sure that “Re-partition” is not checked. (On the left side you will see Re-partition under the Option tab or on PIT tab for new versions of Odin).

(13) Make sure that you only checked this options on Odin (Auto Reboot , F. Reset Time ) , See the image below .

(14) When the G130HNXXU0AOI3_G130HNDHR0AOI2_DHR.tar.md5 file is loaded you can press Start to begin the Firmware Installation Process.

(15) Don’t move or touch the USB Cable while the Firmware is being Flashed.

(16) Finally you will see a message saying ‘PASS” on a green background as the shown in the below image. This means that the Firmware Update is successfully installed. Your device should reboot now and run on the new Firmware.

(17) If your device stuck in bootloop, go into Recovery Mode by pressing and hold ( Volume Up + Home + Power ) buttons all at the same time and choose " Wipe Cache Partition" and then choose " Wipe data/factory reset " and select " Yes delete all user data " then choose " Reboot system now " .

Firmware Android