Thursday, November 12, 2015

Install and Update T810XXU2BOJ1 Android 5.1.1 Lollipop on Galaxy Tab S2 9.7 Wi-Fi SM-T810 [Full Guide]

T810XXU2BOJ1 Android 5.1.1 Lollipop Official Firmware for Samsung Galaxy Tab S2 9.7 Wi-Fi SM-T810 is now available and you can manually download it from here on ok android and also install it using our Complete Installation Guides that will help you installing Official Firmware Update, So if you want to get this update for Galaxy Tab S2 9.7 Wi-Fi SM-T810, you must know that there are several ways to do that, so you can follow this installation guide that will help you installing your Official Firmware Update .

Install and Update T810XXU2BOJ1 Android 5.1.1 Lollipop on Galaxy Tab S2 9.7 Wi-Fi SM-T810 [Full Guide] - ok android
You can install and update Official firmware T810XXU2BOJ1 Android 5.1.1 Lollipop on your Samsung Galaxy Tab S2 9.7 Wi-Fi SM-T810 by following one of the following methods in our Complete Installation Guide. 

You can choose one method only to Update the Firmware.

We advice you to updating your Firmware always to fix bugs and Errors. Firmware Update will increase the performance of your Samsung device also.


Note :  ok android team are not responsible for any damage caused in your device , so be careful and do that in the right way and at your own risk. Also don't use this Firmware with any other model.

Before doing anything please do a backup for your important data and make sure that your device battery is fully charged or 75% at least.

See this simple guide to learn How to Backup and Restore your Android Phone or Tablet

Now we will show you How to download and install software/firmware update for Galaxy Tab S2 9.7 Wi-Fi SM-T810 .

How to Install/Update T810XXU2BOJ1 Android 5.1.1 Lollipop on Galaxy Tab S2 9.7 Wi-Fi SM-T810 with the official methods (Recommended) :

(1) Using Samsung Kies to check for Firmware Update for Galaxy Tab S2 9.7 Wi-Fi and installing it :

- Run Kies on your computer and make sure that your Computer is connected to the Internet.

- Connect your Samsung Galaxy Tab S2 9.7 Wi-Fi to the USB port in your Computer via USB data transfer cable.

-Wait for your device to appear on the upper left side of the window.

- Click on the device name (SM-T810).

- A new window will appear on the right side of  Kies.

- Under the “Firmware Information” tab, see if there are any updates available. If there are, you should see the message ‘New Firmware is available‘.

- If you want to install this update on Galaxy Tab S2 9.7 Wi-Fi SM-T810, press the ‘Firmware Upgrade‘ button.

- A new window will appear. The process contains more phases : (‘Download’ > ‘Upgrade’ > ‘Complete’). 

- At the end of the installation process your device will reboot. Now you can disconnect the cable from the Computer and your phone .

- Click OK .
 
- You can verify if you have the Latest Firmware update for Galaxy Tab S2 9.7 Wi-Fi by going to Settings > More > About phone and you will see another Firmware version name and number .

(2) OTA (Over The Air) : 

-You can get this update for Galaxy Tab S2 9.7 Wi-Fi SM-T810 by following this steps and before that make sure your device is connected to the Internet through a Wi-Fi network - go to Settings > More > About Phone > Software Updates and click on ‘Check for updates‘.

How to Install/Update T810XXU2BOJ1 Android 5.1.1 Lollipop on Galaxy Tab S2 9.7 Wi-Fi SM-T810 with the manual method : 

With this method we will install the Latest Official Firmware Update with Odin, so if you want to Install/Update T810XXU2BOJ1 Android 5.1.1 Lollipop on Galaxy Tab S2 9.7 Wi-Fi SM-T810 with Odin follow the following steps :


Details of T810XXU2BOJ1 Android 5.1.1 Lollipop Official Firmware Update For Galaxy Tab S2 9.7 Wi-Fi SM-T810 :

XXU2BOJ1 Firmware Details :

Model :                   SM-T810
Model Name :      Galaxy Tab S2 9.7 Wi-Fi
Country :                Cellular South
Version :                 Android 5.1.1
Changelist :          5971344
PDA :                       T810XXU2BOJ1
CSC :                      T810XAR2BOJ1

Canada : T810XXU2BOJ1_T810XAC2BOJ1_XAC


To Download and Install T810XXU2BOJ1 Android 5.1.1 Lollipop on Galaxy Tab S2 9.7 Wi-Fi SM-T810 for another countries go to this page and select your country. 


(2) Extract the T810XXU2BOJ1_T810XAR2BOJ1_XAR.ZIP file to any place in your Computer.
 
(3) Download Odin 3.10.7 from : Download Desktop Odin for Windows [All Versions].


(4) Extract the Odin ZIP file to any place in your computer.


(5) Download and install you Samsung USB drivers . If you already installed Samsung Kies then you already have the USB drivers , If not go to this page and download the latest USB driver for your Samsung device.


(6) Go to Developer Options in your Samsung Galaxy Tab S2 9.7 Wi-Fi SM-T810 Settings and Activate USB Debugging Mode.

Install and Update T810XXU2BOJ1 Android 5.1.1 Lollipop on Galaxy Tab S2 9.7 Wi-Fi SM-T810 [Full Guide]


Note: Developer Options is hidden by default, so if you can't see the Developer Options in your device settings ,go to Settings > More > About Phone > Press 7 times on Build Number to make Developer Options Visible to you . Now you can enable USB Debugging Mode in Developer Options .

Install and Update T810XXU2BOJ1 Android 5.1.1 Lollipop on Galaxy Tab S2 9.7 Wi-Fi SM-T810 [Full Guide]

(7) Turn off your phone and now you have to enter Download Mode .

-To enter Download Mode press and hold : " Power + Volume Down + Home Button " , all at the same time and when you see the warning message release the buttons and press Volume Up button to confirm that you want to enter Download Mode.

Install and Update T810XXU2BOJ1 Android 5.1.1 Lollipop on Galaxy Tab S2 9.7 Wi-Fi SM-T810 [Full Guide]


Install and Update T810XXU2BOJ1 Android 5.1.1 Lollipop on Galaxy Tab S2 9.7 Wi-Fi SM-T810 [Full Guide]


(8) Start Odin from your Computer ( You Need To Run Odin As Administrator ) .


(9) Connect your Galaxy Tab S2 9.7 Wi-Fi SM-T810 via USB data transfer cable.


(10) You will see in Odin a section called ID:COM (on the left upper side of the window). The blank space under it will turn blue if your device is recognized (If the phone is not recognized make sure you have installed the USB Drivers) .

Install and Update T810XXU2BOJ1 Android 5.1.1 Lollipop on Galaxy Tab S2 9.7 Wi-Fi SM-T810 [Full Guide]
   
Install and Update T810XXU2BOJ1 Android 5.1.1 Lollipop on Galaxy Tab S2 9.7 Wi-Fi SM-T810 [Full Guide]

(11) Check "AP / PDA" box and click on "AP / PDA" and add the T810XXU2BOJ1_T810XAR2BOJ1_XAR.tar.md5 file from the T810XXU2BOJ1_T810XAR2BOJ1_XAR.ZIP extracted folder.


Install and Update T810XXU2BOJ1 Android 5.1.1 Lollipop on Galaxy Tab S2 9.7 Wi-Fi SM-T810 [Full Guide]

(12) Important !!! Do not place anything under the PIT section and make sure that “Re-partition” is not checked. (On the left side you will see Re-partition under the Option tab or on PIT tab for new versions of Odin).


(13) Make sure that you only checked this options on Odin (Auto Reboot , F. Reset Time ) , See the image below .


Install and Update T810XXU2BOJ1 Android 5.1.1 Lollipop on Galaxy Tab S2 9.7 Wi-Fi SM-T810 [Full Guide]


(14) When the T810XXU2BOJ1_T810XAR2BOJ1_XAR.tar.md5 file is loaded you can press Start to begin the Firmware Installation Process.

Notes:

--> If your Galaxy Tab S2 9.7 Wi-Fi SM-T810 have any kind of Custom ROMs installed such as Carbon RIM, Beanstalk ROM, KiquidSmooth ROM, PACman ROM, Omni ROM, Avatar ROM, AOKP ROM, SLIM ROM, ParanoidAndroid ROM, CyanogenMod ROM .. etc, then it will replaced with the new stock Firmware/ROM .

--> If you have any kind of Custom Recovery such as CWM,TWRP Recovery ,then it will replaced by the new Stock Recovery .

--> You will lose your Root, but don't worry you can Root Galaxy Tab S2 9.7 Wi-Fi SM-T810 again after Updating the Firmware .

(15) Don’t move or touch the USB Cable while the Firmware is being Flashed.


(16) Finally you will see a message saying ‘PASS” on a green background as the shown in the below image. This means that the Firmware Update is successfully installed. Your device should reboot now and run on the new Firmware.

Install and Update T810XXU2BOJ1 Android 5.1.1 Lollipop on Galaxy Tab S2 9.7 Wi-Fi SM-T810 [Full Guide]



(17) If your device stuck in bootloop, go into Recovery Mode by pressing and hold ( Volume Up  +  Home  +  Power ) buttons all at the same time and choose " Wipe Cache Partition" and then choose " Wipe data/factory reset " and select " Yes delete all user data " then choose " Reboot system now " . 

Posted by at
Labels: ,

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)